What it means
Fb on the display of a Frigidaire chest freezer means Freeze Boost is on. Fb is an optional boost you started yourself. Press the Freeze Boost button once more to switch it off.
Frigidaire freezer Fb / Mode, not a failure
Fb on the display of a Frigidaire chest freezer means Freeze Boost is on. Fb is an optional boost you started yourself. Press the Freeze Boost button once more to switch it off.
Also shown as Fb
Fb on the display of a Frigidaire chest freezer means Freeze Boost is on. Fb is an optional boost you started yourself. Press the Freeze Boost button once more to switch it off.
One press switches the function on or off.
Fb stays after pressing the button, or the freezer stays too cold.
Your checklist / kept on this device

One press switches the function on or off.

The display returns to showing the temperature.

If Freeze Boost stays on, the interior can run colder than you want.

The mode is meant for short spells, not everyday use.
Tell us the model and what you have already checked, and start the request right here.
Book a visit
Simplified schematic; real layouts differ by model. Tap an outlined part for its photo and the check that goes with it.
The manual says pressing the Freeze Boost button activates the function and the display shows Fb. It exists in freezer mode only.
Read the supporting manualThe quick guide says Freeze Boost stays active for up to 24 hours, then switches off by itself or when you exit it.
Read the supporting manualFrigidaire's upright manual suggests running it before a grocery trip, so newly bought frozen food keeps well.
Read the supporting manualManufacturer document
Frigidaire / Electrolux
December 2025 / PDF p.8 (5.2 Freeze Boost), p.9 (note and Lock/Unlock), p.12 (8.2 Appliance Temperatures)
Manufacturer document
Frigidaire / Electrolux
No edition date printed (file dated March 2025) / PDF p.1 (You're in control, FAQs)
Manufacturer document
Frigidaire / Electrolux
February 2021 / PDF p.16 (Controls: FREEZE BOOST)
Chest freezer manual A31283301 (December 2025). The boost function exists in freezer mode only.
No. It is a feature you press on purpose.
The troubleshooting table lists an active Freeze Boost as a cause of a too-cold interior. Turn it off.
Yes. The manual says to hold the Freeze Boost button for 3 seconds to lock or unlock the temperature setting.
Press the button again, firmly. If it sticks, book a visit.
Code / problem / part / repair
A Frigidaire chest freezer that shows HI is giving its High Temperature Alert: the temperature has gone above the set level. Press any button to clear it, keep the lid closed, and check the food.
Frigidaire's article runs through install and power first, then the setting, a recent outage, the location, the door seal, frost and overloading. The suggested freezer setting is 0 F. If the unit has run for 24 hours and is still not cold, schedule service.
Book a diagnostic for your model, done at your home.
Office addresses and the entry details to have ready.