Frigidaire does not list ER in either dishwasher code table or in its knowledge base. The footnote under the tables covers any code: press Cancel or switch off at the breaker for 5 minutes. If ER stays, book a technician.
What the manual says about Frigidaire dishwasher ER.
Manual evidence
Both published tables stop at the i-codes (i10 to iC0) and their E equivalents (E10 to EC0). ER is in neither. A footnote says the Cancel button or a 5-minute breaker-off should clear an error, and otherwise points owners to Frigidaire's care center.
Frigidaire's dishwasher tables say pressing Cancel can clear an error code. Close the door fully first, because a door that is not latched can itself trigger a message.
2
Switch the power off for 5 minutes
If Cancel does not help, turn the dishwasher off at the breaker for 5 minutes, per the footnote under both Frigidaire error tables, then power it back up and start a cycle.
Note these details before you book.
Model and serial number
Full display text
When the message appears
Steps you have already taken
When to call.
ER reappears once Cancel and the 5-minute power-off are done, or the dishwasher refuses to run a cycle.
The sources do not say. It is absent from both code tables and the dishwasher knowledge-base articles we read, so any definition we gave would be invented.
Could ER be a misread E-code?
Possibly, since an E-code display shows a number after the E. The tables run E10, E20, E30, E40, E50, E60, EC0 and EF0, so check the characters again.
Is ER safe to ignore if the cycle finishes?
We cannot say so. If it shows repeatedly, even with a finished cycle, arrange a check, and mind any water on the floor around the machine.
The footnote says to contact Frigidaire. Do I need to?
If your unit is under Frigidaire's warranty, Frigidaire handles that repair. Out of warranty, you can book a technician with us instead.