Error codes explained

Frigidaire refrigerator alarms: clear it, or book a visit

Frigidaire's refrigerator alarms split in two. HI, PF, Door Ajar, DI SP, Sb and 77 77 are things you can clear: close a door, acknowledge the alarm, clear a jam or leave a mode. SY CE, SY CF, SY EF, OP and SH are listed as codes that could mean a visit, with no meaning given.

French-door refrigerator with one door slightly ajar and a small amber indicator light beside a dark door display.
Experienced techniciansWarranty on our workmanshipOEM parts available on orderUpfront pricing, agreed before work
On this page
Key points
  • Door Ajar sounds after 5 minutes with a door open; closing the door clears it. 12
  • HI trips at 26 degrees F or more in the freezer, or 55 degrees F or more in the refrigerator. 2
  • Sb is Sabbath mode and 77 77 is store demo mode; neither is an error. 15
  • SY CF, SY CE, SY EF, OP and SH are on a service list with no meaning printed. 2
  • Frigidaire's own HI alarm repeat time conflicts: 10 seconds in a manual, 60 in a KB article. 45

Which Frigidaire refrigerator alarms can I clear myself?#

Six of them. HI, PF, Door Ajar, DI SP, Sb and 77 77 all come with an action on your side: close a door, acknowledge the alarm, clear a jam, or leave a mode. Frigidaire treats them as alerts about the refrigerator's state, not as parts that failed. 12

Frigidaire's Owner Center says most alarms exist to tell you something has changed or that you need to act. The alarms differ by model, so the details below come from its articles and from two use-and-care manuals, and your own manual comes first. 256

DisplayWhat Frigidaire says it meansWhat you do
Door AjarA door has been open for 5 minutes or more.Close the door; press Set (or any key) to reset. 125
HI or HThe freezer or refrigerator is above its temperature limit.Check the doors and seals, then acknowledge. 124
PFA power outage or power surge.Acknowledge it once power is back. 12
DI SPIce is jammed in the dispenser chute.Remove the jam. 12
SbSabbath mode is active.Turn it off using the keys your manual names. 12
77 77Store demo mode.Unplug for 5 minutes. 1

How do I clear a refrigerator alarm?#

Press CLEAR ALERTS on the panel, or whichever acknowledge key your model has. If the alarm stays, unplug the refrigerator for 30 seconds and plug it back in, or flip the breaker. Frigidaire notes the breaker resets everything on that circuit. 14

Which key you press depends on the model. Frigidaire's articles name CLEAR ALERTS, Alarm Reset and Set. One current manual says to touch any key, or open a door, to silence the high temperature tone. Another says to press any button to silence the power outage tone. 256

  1. 1

    Close both doors#

    Make sure nothing is propping a door open and that the doors seal. A door left open is the most common reason for Door Ajar and HI. 12

  2. 2

    Acknowledge the alarm#

    Press CLEAR ALERTS, Alarm Reset, Set or any key, depending on your model. 125

  3. 3

    Reset only if it persists#

    Unplug for 30 seconds and plug back in, or flip the breaker if you cannot reach the plug. 1

  4. 4

    If the display lights up and it beeps#

    Frigidaire's guide treats this as a possible power failure or error. It suggests a hard reset: unplug for 2 to 3 minutes. 1

A reset is a first step and not a repair. If the same alarm is back an hour later with the doors shut, the reset did not reach the cause.

Which codes does Frigidaire put on the service list?#

SY CF, SY CE, SY EF, OP and SH. Frigidaire's French-door article puts these five under one line saying they could mean service is needed, and gives no description for any of them. The four-door article does the same for Er CE and Er T1 to Er T6. 23

That is everything Frigidaire says. No cause is named, no home remedy is offered, and none of these codes appears in the refrigerator manuals we hold. We will not put a meaning on a code Frigidaire has chosen not to explain. 23

What you can do is rule out the simple things and note what you see. Check both doors, reset once, and watch the cabinet temperatures. If the code stays, a technician can read the unit directly.

  • SY CE and SY CF: the service list, with no meaning printed.
  • SY EF: the same list.
  • OP: the same list.
  • DF: not in any Frigidaire document we checked, so it is not on the list either.

SH sits on the same service list and has no page of its own on this site. The sources say nothing more about it than they do about the others. 2

When does the HI alarm mean a real problem?#

HI means a compartment passed its limit: 26 degrees F or more in the freezer, 55 degrees F or more in the refrigerator, according to Frigidaire's alarm articles. Usually a door was left open or not sealed. If HI returns with the doors shut, book a visit. 24

The Owner Center's HI article lists what can cause it. The door may have been open too long. The temperature settings may have been changed (it recommends 37 degrees F for the refrigerator and 0 degrees F for the freezer). Or the door gasket may not seal well. The alarm can be muted, but stays active until the unit reaches a normal temperature. 24

HI also follows power trouble. After a long outage, the PF alarm and the HIGH TEMP alarm can both be active until the unit recovers. In that situation HI is a result of the outage, not a separate problem. 2

Frigidaire's own pages disagree on small points. One KB article says the HI tone repeats every 60 seconds. A September 2025 manual says every 10 seconds. A third source says HI blinks after the temperature has been too high for over an hour. We report all three rather than pick one. 145

Why does my refrigerator show Sb or 77 77?#

Both are modes, not alarms. Sb means Sabbath mode is on, which turns off the lights, dispenser and display until you exit. 77 77 is store demo mode, and Frigidaire says unplugging the unit for 5 minutes switches it off. 15

Sabbath mode stays on after a power failure and must be switched off from the control panel. The key combination depends on the model, which is why Frigidaire's pages differ. The Owner Center says hold "-" and Temp F-C together for 5 seconds. One manual says FZ- and FF+ together for 10 seconds. Another says Temp F-C and FREEZER for 5 seconds. 156

During Sabbath mode the high temperature alarm stays active for safety reasons, and the manuals say a door left ajar still triggers it. 56

Do top-freezer refrigerators have their own codes?#

Some do. The March 2026 top-freezer manual prints an error table in which E6 is a communication failure, E7 a ring temperature error and EH a humidity sensor error, each shown by flashing indicators. It lists no owner steps for them. 7

The table begins on the page before, with further rows we have not reproduced here. If your top-freezer shows a flashing indicator and an E code, find the row in your own manual and note what it says. Beyond that table, Frigidaire gives no step for these. 7

When should I book a technician for a refrigerator code?#

Book when a service-list code (SY CE, SY CF, SY EF, OP, SH, Er CE, Er T1 to T6) stays after a reset, or when HI keeps returning with the doors shut and sealed. Alarms you cleared by closing a door or acknowledging a power outage do not need a visit. 123

If the refrigerator was installed in the last 30 days, Frigidaire's Owner Center asks you to go back to the installer first. After that, a persistent code is a service call. Tell us the code, which doors were open, and what you tried. 1

The technician agrees the price with you before any work starts. The exact cost is confirmed after the on-site diagnostic. If your unit is under Frigidaire's warranty, Frigidaire handles that repair. We give a warranty on our workmanship. When you are ready, schedule a visit with us, or see the refrigerator service page.

Sources#

  1. Refrigerator Error Codes and Alarms Guide (KB 1847088)Frigidaire / Owner Center knowledge base · Owner Center article, cached 10.11.2026 (no edition date printed) · Article text
  2. What do the alarms or error messages mean on my French-Door refrigerator? (KB 1853035)Frigidaire / Owner Center knowledge base · Owner Center article, cached 10.11.2026 (no edition date printed) · Article text
  3. What do the alarms or error messages mean on my Four-Door refrigerator? (KB 1853034)Frigidaire / Owner Center knowledge base · Owner Center article, cached 10.11.2026 (no edition date printed) · Article text
  4. Refrigerator Error Code H or HI - High Temperature (KB 1917064)Frigidaire / Owner Center knowledge base · Owner Center article, cached 10.11.2026 (no edition date printed) · Article text
  5. User Manual, Fridge Freezer, A28846701Frigidaire / Electrolux · September 2025 · PDF p.18 (7.2 Clear Alerts, 7.3 Sabbath Mode)
  6. Refrigerator Use & Care, A23655704Frigidaire / Electrolux · June 2025 · PDF p.17 (Alarms); p.18 (Sabbath mode)
  7. User Manual, Fridge Freezer (top freezer), A30598301Frigidaire / Electrolux · March 2026 · PDF p.18 (Errors table)

Here to help

Good questions.
Clear answers.

Talk to our team
Can I silence a Frigidaire refrigerator alarm without fixing anything?

Usually yes. Frigidaire's alarms can be acknowledged with CLEAR ALERTS, Alarm Reset, Set or any key, depending on the model. The HI alarm can be muted but stays active until the temperature recovers. See sources 1, 2, 4 and 5.

How long does a power outage alarm stay on?

It stays until you acknowledge it once power is back, by pressing Alarm Reset (or any key on some models). If the outage was long, the HIGH TEMP alarm may also sound until the unit reaches a safe temperature. See sources 2 and 5.

What does SY CE mean?

Frigidaire does not say. SY CE, SY CF, SY EF, OP and SH sit in an Owner Center list of codes that could mean service is needed, with no description of any of them. We give them no meaning. See source 2.

Is the HI alarm tone every 10 seconds or every 60?

Frigidaire prints both. The September 2025 manual says the tone repeats every 10 seconds until acknowledged. An Owner Center article says every 60 seconds. Models differ, so go by what your unit does. See sources 4 and 5.

Why does the display say Sb?

Sb means Sabbath mode is on, which is a setting rather than a problem. The lights, dispenser and display stop working in it, and it stays on after a power failure until you switch it off with the control-panel buttons. See sources 1 and 5.

Let’s take care of it.

The range is the heart
of the kitchen. Let’s fix it.