Frigidaire dryer E8C / Dryer

Frigidaire dryer
error E8C

Frigidaire's dryer guide prints three codes, C9, E4 and E5, and nothing for E8C, leaving us with no meaning to report. Clear the lint screen, look at the vent and the plug, and book a visit if E8C returns or the drum quits heating or drying.

No meaning given in the documents we checked

Last reviewed

E8C
E8CDryer
Manual evidence

What the manual says about Frigidaire dryer E8C.

Manual evidence

The dryer guide A29259201 has a short error table: C9, E4 and E5, with a failed control board, a failed humidity sensor and a failed temperature sensor as the possible causes. E8C is not in it.

Safe first steps.

  1. 1

    Stop it and let it rest

    End the cycle, leave the door shut for a couple of minutes, then restart a short load to see if E8C comes back.

  2. 2

    Clear the lint screen

    Slide out the lint screen, wipe the lint off and put it back firmly. Frigidaire lists a clogged screen among the usual causes of long drying times.

  3. 3

    Look at the vent and the cord

    Make sure the vent hose is not crushed behind the dryer and the plug sits fully in the outlet. Do not reach behind a hot dryer; wait until it has cooled.

Note these details before you book.

White dryer in a sunlit laundry corner with folded towels on top
  • Model and serial number
  • Full display text
  • When the message appears
  • Steps you have already taken

When to call.

E8C reappears following a restart, the dryer stops heating or drying, or a burning smell appears. Stop the dryer if you smell burning.

Book a visit(844) 481-0454

The documents we checked.

Source 1

All about the Use & Care of your Dryer, A29259201

Frigidaire / Electrolux (retailer-hosted copy of the official document) / August 2024 / PDF pp.14-15 (Avoid Service Checklist, Error Codes)

Here to help

Good questions.
Clear answers.

Talk to our team
What does E8C mean on a Frigidaire dryer?

Frigidaire doesn't say. The guide we hold prints C9, E4 and E5 only, so any meaning for E8C would be a guess.

Could E8C be a sensor problem?

The guide ties its three printed codes to a control board, a humidity sensor and a temperature sensor, but it does not tie E8C to any of them.

Is it safe to run the dryer with E8C on the display?

After one restart, a short test load is reasonable if it tumbles and heats. Stop it at once if it smells hot or burning, and book a visit.

What helps a technician with E8C?

The model label, the display as shown and whether the dryer still tumbles and heats when E8C shows.

Let’s take care of it.

The range is the heart
of the kitchen. Let’s fix it.