Frigidaire dryer E68 / Dryer

Frigidaire dryer
error E68

E68 is not printed in Frigidaire's current dryer manual, which lists only C9, E4 and E5. We cannot give it a meaning. Run through the manual's avoid-service checks, and book a technician if E68 comes back or the dryer will not run.

No meaning given in the documents we checked

Last reviewed

E68
Dryer
Manual evidence

What the manual says about Frigidaire dryer E68.

Manual evidence

The error-code table in A29259201 has three entries: C9 (control board failed), E4 (humidity sensor failed) and E5 (temperature sensor failed). E68 is missing. The same page ends with the avoid-service checklist for no start, no heat and long drying.

Safe first steps.

  1. 1

    Check the plug, breaker and door

    The dryer manual's avoid-service list starts with a firmly seated plug, a tripped breaker or blown fuse, and a fully closed door.

  2. 2

    Clean the lint filter

    Remove lint before each cycle. The manual lists a clogged lint filter and a restricted exhaust duct among the common reasons for long drying times.

  3. 3

    Rerun a short cycle

    Once the basics are covered, start the dryer again and note whether the code returns and at what point in the cycle.

Note these details before you book.

White dryer in a sunlit laundry corner with folded towels on top
  • Model and serial number
  • Full display text
  • When the message appears
  • Steps you have already taken

When to call.

E68 returns after the checks, or the dryer stops, will not heat or runs far too long.

Book a visit(844) 481-0454

The documents we checked.

Source 1

All about the Use & Care of your Dryer, A29259201

Frigidaire / Electrolux (retailer-hosted copy of the official document) / August 2024 / PDF pp.14-15 (Avoid Service Checklist, Error Codes)

Here to help

Good questions.
Clear answers.

Talk to our team
What does E68 mean on a Frigidaire dryer?

The manual does not say. Its table shows C9, E4 and E5 only. Anything more specific would be a guess, so we do not offer one.

Is E68 a heating problem?

We cannot show that. The manual's heating advice sits in its checklist: gas supply valve, house fuses, lint filter and exhaust. E68 is not tied to any of them.

Why do I see E68 on a dryer with a current manual?

The model may belong to a different code set. Check the model number on the label inside the door and compare it with your own manual.

Can lint cause an E68 code?

No source links lint to E68. A clogged filter or duct is still worth fixing, since the manual connects both to long drying times.

Let’s take care of it.

The range is the heart
of the kitchen. Let’s fix it.