Frigidaire dryer E11 / Dryer

Frigidaire dryer
error E11

Frigidaire's dryer guide prints three codes, C9, E4 and E5, and nothing for E11, leaving us with no meaning to report. Clear the lint screen, look at the vent and the plug, and book a visit if E11 returns or the drum quits heating or drying.

No meaning given in the documents we checked

Last reviewed

E11
Dryer
Manual evidence

What the manual says about Frigidaire dryer E11.

Manual evidence

The dryer guide A29259201 has a short error table: C9, E4 and E5, with a failed control board, a failed humidity sensor and a failed temperature sensor as the possible causes. E11 is not in it.

Safe first steps.

  1. 1

    Stop it and let it rest

    End the cycle, leave the door shut for a couple of minutes, then restart a short load to see if E11 comes back.

  2. 2

    Clear the lint screen

    Slide out the lint screen, wipe the lint off and put it back firmly. Frigidaire lists a clogged screen among the usual causes of long drying times.

  3. 3

    Look at the vent and the cord

    Make sure the vent hose is not crushed behind the dryer and the plug sits fully in the outlet. Do not reach behind a hot dryer; wait until it has cooled.

Note these details before you book.

White dryer in a sunlit laundry corner with folded towels on top
  • Model and serial number
  • Full display text
  • When the message appears
  • Steps you have already taken

When to call.

E11 reappears following a restart, the dryer stops heating or drying, or a burning smell appears. Stop the dryer if you smell burning.

Book a visit(844) 481-0454

The documents we checked.

Source 1

All about the Use & Care of your Dryer, A29259201

Frigidaire / Electrolux (retailer-hosted copy of the official document) / August 2024 / PDF pp.14-15 (Avoid Service Checklist, Error Codes)

Here to help

Good questions.
Clear answers.

Talk to our team
What does E11 mean on a Frigidaire dryer?

Frigidaire doesn't say. The guide we hold prints C9, E4 and E5 only, so any meaning for E11 would be a guess.

Could E11 be a sensor problem?

The guide ties its three printed codes to a control board, a humidity sensor and a temperature sensor, but it does not tie E11 to any of them.

Is it safe to run the dryer with E11 on the display?

After one restart, a short test load is reasonable if it tumbles and heats. Stop it at once if it smells hot or burning, and book a visit.

What helps a technician with E11?

The model label, the display as shown and whether the dryer still tumbles and heats when E11 shows.

Let’s take care of it.

The range is the heart
of the kitchen. Let’s fix it.