Frigidaire dryer E10 / Dryer

Frigidaire dryer
error E10

E10 is not in Frigidaire's dryer manual. The code E10 that Frigidaire does print belongs to dishwashers, where it means a low fill, and that does not carry over to a dryer. Check the basics and book a technician if E10 stays.

No meaning given in the documents we checked

Last reviewed

E10
Dryer
Manual evidence

What the manual says about Frigidaire dryer E10.

Manual evidence

The dryer manual A29259201 lists C9, E4 and E5. Frigidaire's dishwasher manual 117825980A, page 10, lists E10 as a low fill, a different appliance entirely. No dryer document defines E10.

Safe first steps.

  1. 1

    Check the plug, breaker and door

    The dryer manual's avoid-service list starts with a firmly seated plug, a tripped breaker or blown fuse, and a fully closed door.

  2. 2

    Clean the lint filter

    Remove lint before each cycle. The manual lists a clogged lint filter and a restricted exhaust duct among the common reasons for long drying times.

  3. 3

    Rerun a short cycle

    Once the basics are covered, start the dryer again and note whether the code returns and at what point in the cycle.

Note these details before you book.

White dryer in a sunlit laundry corner with folded towels on top
  • Model and serial number
  • Full display text
  • When the message appears
  • Steps you have already taken

When to call.

E10 returns after the checks, or the dryer stops, will not heat or runs far too long.

Book a visit(844) 481-0454

The documents we checked.

Source 1

All about the Use & Care of your Dryer, A29259201

Frigidaire / Electrolux (retailer-hosted copy of the official document) / August 2024 / PDF pp.14-15 (Avoid Service Checklist, Error Codes)

Here to help

Good questions.
Clear answers.

Talk to our team
Does E10 on my dryer mean low water?

No. The low-fill meaning is for dishwashers. A dryer does not fill with water, so the dishwasher entry says nothing about your machine.

Is E10 related to the E4 or E5 sensor codes?

The manual explains E4 and E5 but not E10, and it does not link them. We will not say they share a cause.

Can I clear E10 by unplugging the dryer?

It may clear a one-off display, but the dryer manual does not mention it for E10. If it returns, treat it as a reason for a diagnostic.

Which model information helps with E10?

The model and serial numbers from the label inside the door, whether the dryer runs gas or electric, and when in the cycle E10 appeared.

Let’s take care of it.

The range is the heart
of the kitchen. Let’s fix it.